型号:BA-M-700/BA-M-700-A 一、产品说明:硫化仪,为振动无转子系统,用於测定橡胶硫化黏弹性之特性。是生产实务、基础研究、配料控管最重要的设备。 Moving die rheometer(rotorless cure meter)isused for the measurement of selected vulcanization characteristics of rubber compends. 满足标准 ASTM-D5289,ISO6502,3417,GB-T16584 Produce spec. ASTM-D5289,ISO6502,3417,GB-T16584 可显示曲线类别:上下模温度曲线 / 硫化弹性曲线/ 硫化速率曲线 / 黏性曲线/ 黏-弹性曲线 / TWN曲线/ 相角曲线 二.技术参数 模子型态-密闭型模具 BA-M-700-A以密封圈隔绝模心与外框,上下模可完全密闭 Sealed die type Isolate the die`s opening and frame by the sealed ring.the upper ang lower die can be totally sealed. 模子型态-开放型模具 BA-M-700可精确、自由调整上下模间隙 unsealed die type Be able to precisely adjust the gap between upper and lower die freely. 温度控制:电脑连线控制,PID.SSR控制,控制 围:室温~200°C Temp .control:Control by computer&PID.SSR range:room temp.~200°C 温度精确度:温度误差±0.3°C , 温度最小读值0.1°C Temp.accuracy:temp.error±0.3°C min.reading of temp. 0.1°C 升温速度:室温~190°C<8' 50" Speed of rising temp:room.temp. ~190°C<8' 50" 改变温度所需时间:175°C~190°C<4' 190°C~175°C<4' 50" Time for temp.change :175°C~190°C<4' 190°C~175°C<4' 50" 振动频率:100cpm(1.66Hz),100cpm(1.66Hz), Oscillation frequency:100cpm(1.66Hz),driven by servo motor 扭距范围:弹性 , 1~200 lb-in/粘性, 0.3~200 lb-in 可选择电脑自动切换或自行设定 Torque range:selectable by auto-switching or manually setting 扭距单位:kg-cm, lb-in, N-m Torque unit:kg-cm, lb-in, N-m 扭距最小读值:0.001单位 Min.reading of torque&pressure:0.001单位unit 振动角度:±0.5°, ±1°, ±2°, ±3° Oscillation amplitude:±0.5°, ±1°, ±2°, ±3° 测试时间:时间无限制并可测试中途改变 Time range:Without limit;can be changed during test 电源 1∮,AC220V±10%,50/60Hz±3Hz, 10A Power 1∮,AC220V±10%,50/60Hz±3Hz, 10A 气压:4.6kg/ cm2(0.46MPA)客户自备 Pressure:4.6kg/ cm2(0.46MPA)prepared by customer 试料体积3~5cm3 Specimen volume 约 3~5cm3 体积(W×D×H)-主机(密闭型模具):66×66×124cm Dimension(W×D×H)-main unit Sealed die type:66×66×124cm 体积(W×D×H)-主机(开放型模具):66×66×115 cm Dimension(W×D×H)main unit unsealed die type:66×66×115 cm 体积(W×D×H)-主机柜:60×60×75 cm Dimension(W×D×H) test stand:60×60×75 cm 体积(W×D×H)-电脑装配柜:55×60×151cm(含列表机) Computer cabinet:55×60×151cm(including the printer) 总重量-密闭型模具:399 kg Weight-Sealed die type:399 kg 总重量-开放型模具:393 kg Weight- unsealed die type:393 kg 标准配备:电脑系统一套(含彩色萤幕,硬碟各一个及彩色喷墨列表机一台) Equipped with:computer×1(includes monitor×1,hard disk×1&printer×1) 标准附件: 标准扭力校正器一个(含在主机内),电热片2片,手套1双,电源稳压器1个,起子1只,列表纸,密封圈10个(密闭型模具用) Accessories: torque calibrator×1(inside the main unit),heater plate×2,a pair of gloves,screwdriver×1,printer paper,sealed ring(only for sealed die)
|